6’6″ Wing Foil | SUP Board

Our SUP Foil Boards are a dedicated design by Steve Legge that will get you going as efficiently as possible no mater the conditions. The thicker board with our “duck bill” nose makes the board very stable to start out, with the shorter length allowing for super easy flight and turns.

The 6’6” is our all-round performance SUP foil board. Designed for the 175 +lbs rider @ 135 litres, this board will give you better feel than your wave SUP, and unmatched performance of a mid-sized surf board.

The small concave deck with 3k carbon standing zone delivers a solid feel for powerful turns without catching a rail. The chinned rails and aggressive kick tail maximizes the release and increases flight time. The progressive rocker is ideal for those touch down so you can skim back up or get going as easily as possible to carve a turn.

Standard 90mm Foil Mount with our Pro 3K Carbon and Glass “Foil Mount” construction is by far the most detailed in the Foil Board industry, it not only adds strength, it gives more feel and control.

High performance and comfort blended in one board, the 6’6” is an incredible board for many Foiling disciplines, SUP, Wing Wing or Downwind.
Our boards will transform any tiny onshore conditions into an incredible day !



LengthWidthThicknessVolumeColourWeight Rating
6’6” 30” 5” 135 lt White/Red 175 + lbs
Stinger Foils 6'6" SUP | Wind Wing Board Package

Stinger Foils 6'6" SUP | Wind Wing Board Package


Epoxy construction

  1. 2 piece grip-lite EVA pad
  2. Paint
  3. 6oz cloth
  4. 3K carbon strips
  5. 3K carbon standing zone
  6. 6oz cloth
  7. 18kg EPS foam core
  8. Foil Box High Density Foam
  9. Foil Box
  10. 6oz cloth
  11. 3K carbon overlay for Foil mount boxes
  12. 3K carbon strips
  13. 6oz cloth


  1. GoPro mount provision on nose
  2. Goretex Vent Valve
  3. White Anegra (Weave) Cloth
  4. Carry Handles, (top & bottom)
  5. 3K carbon standing zone
  6. Foot Strap provisions
  7. Carbon Biaxial Weave
  8. 3K carbon overlay with 90mm Foil Mount

Included with your board

8’ Leash


General knowledge about Wing Foil Boards

Board Size

As most board-riders know, size does matter, lol…. this is especially true for Wing Foiling. You need enough buoyancy to float your weight, enough stability to stand on the board, or a minimum to kneel. The easy answer would be to simply purchase the largest board, but you’ll progress and be pissed off in a few weeks. A larger board, while easier to stand on, will be harder to lift off the water, more difficult to maneuver, and hard to handle in waves. The best way to size a board is one that can just keep you floating when kneeling on it. When wing foiling water starting is very advanced, so pay more attention to the volume, versus size when choosing a board.

We find most riders feel that the proper size board will be similar in volume to their SUP Wave paddle board, and similar in width to their standard SUP board, but it’s a lower volume for Wing Foiling.
As an example, I ride a 150 litre SUP wave model of paddleboard with dimensions 8’6” x 30” x 4", the Wing Foil board with 115 litres of volume and dimensions 6’2 x 29” x 4.75” is a good fit.
Similarly, if you have a "do it all" longboard style SUP that is 175 litres with dimensions 11' x 33 x 5", a Wing foil board of 135 litres would be a good choice with dimensions 6’6” x 30” x 5”.

The wing foil board is shorter and less volume, but adding the Foil and the stability of the smaller board greatly increases.
Sizes and recommendations range by design but If you have some athletisism, I feel this will give you a good place to start...

  • 100-140lbs - 40-70L board
  • 140-160lbs - 70-100L board
  • 160-180lbs - 95-125L board
  • 180-250lbs - 120-150L board

If you can manage it, a shorter board will pump up easier due to the reduced surface tension (suction) on the front of the board. In addition to added maneuverability, the short and wide design also results in a better acceleration curve to build speed for lift off due to its lower aspect ratio and reduced drag.


Kick Tail

The kick tail was designed to rock the board onto foil with less effort and drag. Straight tailed boards act like a brake in the water when you attempt to rock the foil up. For SUP Foil boards, foiling in waves the kick tail is a great feature to have but it is even more beneficial for Wing Foiling. This is because it takes longer to accelerate to flying speed with wind power than a breaking wave's power. An experienced foiler can begin pumping this way before they reach their flying speed by removing the drag and surface tension of the board so that you can reach that speed more quickly and make good use of gusts.

Foot Strap mounting inserts

Foot strap mounting inserts are a good feature to have on your board, even if you are not at that level yet. If you are going to spend the money, it's nice to know that it will support your progression beyond your first steps. Having foot straps allows the rider more leverage and a more secure connection to the board. This is especially important for hard maneuvering or jumps. We offer multiple stance options, Surf or single strap set up, as well as the “V’ front option or Windsurf set up.